Silk Plaster Victoria is the most palette-rich collection in the Silk Plaster main range. Spanning over fifteen shades - from 701 through 724 and beyond - Victoria gives homeowners and designers the breadth they need to build genuinely tailored interiors: warm and earthy in one room, cool and considered in the next, all from a single product family with a single application method.
Victoria is built around the same fibre-based formulation used across the Silk Plaster main collection. Cellulose, silk components, a water-soluble adhesive, and finely sorted decorative particles combine into a soft, paste-like coating you apply with a plastic trowel. As the material dries it forms a continuous, seamless surface - no joints, no cut lines, no visible overlap edges. The fibres knit smoothly over corners and around sockets, so each wall reads as one coherent decorative piece rather than a series of strips.
What designers value about Victoria is its versatility. The same collection can deliver a soft, calming bedroom in one shade, a confident dining room in another, and a tactile feature wall in a third - with consistent texture, drying time, and repair characteristics across every colour. That makes Victoria a particularly strong choice for whole-property refurbishments where you want a single supplier and a coherent finish without the visual monotony of using one shade everywhere.
Victoria is fully repairable. If a section is later knocked, scuffed, or marked by moisture, you simply soften the damaged area with water, lift the affected fibres, and re-apply leftover material from the same pack. The patch blends back in invisibly. For family homes, rental properties, and high-traffic hallways, this single property quietly saves more repainting hours than any other feature of the coating.
From a practical standpoint Victoria is straightforward DIY work. A 0.89 kg pack covers approximately 4 m² depending on thickness, mixes with warm water, and rests for around 12 hours before going onto the wall. The dried layer settles at around 1.17 mm thick - generous enough to handle whole-property finishes with consistent depth across every shade. From there, smooth fan-shaped strokes with the trowel are all that is needed. There is no wallpaper paste, no roll cutting, no joints to align, and cleanup is soap and water. The surface is touch-dry within 24 to 48 hours and fully cured within 72.
The Victoria composition is built for indoor living. The coating is VOC A+ rated, contains no harsh solvents, and emits no lingering odour during or after application. It is breathable, lightly textured, and forgiving on imperfect substrates - small bumps and hairline cracks that would otherwise show through flat paint are quietly absorbed by the texture.
Because Victoria offers so many shades, it is also the easiest collection to combine with itself: a darker shade on one wall, a lighter tone on the others, and a third accent across the ceiling or a niche. For more dramatic layering, Victoria pairs well with the Versailles luxury collections on a single statement wall.
Silk Plaster Victoria ships pan-EU from our Riga warehouse with full technical data sheets and a clear application guide. Pair it with the SP Primer Silk Plaster on porous substrates, and the Expert Trowel for cleaner edges. For homeowners who want choice, consistency, and a seamless, repairable finish in one collection, Victoria is the strongest all-rounder in the main range.
